BFMYR - GLOSS GREEN 14050

  • MSDS: BFMYR
  • Manufacturer: PRATT AND LAMBERT
  • Product Name: GLOSS GREEN 14050
  • National Stock Number: 8010-00-753-4549
Product Identification

Product ID:GLOSS GREEN 14050
MSDS Date:01/01/1987
FSC:8010
NIIN:00-753-4549
MSDS Number: BFMYR

Responsible Party
PRATT AND LAMBERT
945 BURLINGTON
KANSAS CITY, MO 64141
US

Cage: 92216

Contractor
PRATT AND LAMBERT INC
206 KANSAS CITY, MO 64141 US

Cage: 92216

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 40-5%

OSHA PEL 100 PPM


TRIETHYLAMINE (SARA III)

CAS: 121-44-8

RTECS: YE0175000

Fraction By Weight: <0.5%

OSHA PEL 25 PPM/15 STEL

ACGIH TLV: 10 PPM/15 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

Hazards

Effects of Overexposure:INHALATION:ANESTHETIC,IRRITATION OF THE
RESPIRATORY TRACT OR ACUTE NERVOUS SYSTEM DEPRESSION CHARACT

First Aid

First Aid:SKIN OR EYE CONTACT:PRIMARY IRRITATION. IN CASE OF CONTACT
FLUSH SKIN & EYES WITH PLENTY OF WATER WHILE REMOVING CONTAMINATED
CLOTHING.IF INHALED,REMOVE TO FRESH AIR.CALL A MD. IF SYMTOMS
PERSIST.

Fire Fighting

Flash Point:104F TCC
Lower Limits:1.10
Extinguishing Media:USE NATIONAL FIRE PROTECTION ASSOC.(NFPA)CLASS B
EXTINGUISHE
Fire Fighting Procedures:SELF-CONTAINED BREATHING APPARATUS SHOULD BE
AVAILABLE FOR F
Unusual Fire/Explosion Hazard:KEEP CONTAINERS TIGHTLY CLOSED.ISOLATE
FROM HEAT,ELECTRICAL EQUIPMENT,SPARKS AND OPEN FLAME.CLOSED

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION.(FLAMES,HOT
SURFACES,AND ELECTRICAL,STATIC,OR FRICTIONAL SPARKS).AVOID
BREATHING VAPORS.VENTILATE AREA REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F.STORE LARGE
QUANTITIES IN BUILDING DESIGNED TO COMPLY WITH OSHA 1910.106.
Other Precautions:CONTAINERS SHOULD BE GROUNDED WHEN POURING.AVOID FREE
FALL OF LIQUID IN EXCESS OF A FEW INCHES.DO NOT FLAME CUT,BRAZE OR
WELD COATED MATERIAL WITHOUT BUREAU OF MINES APPROVED RESPIRATOR OR
APP

Exposure Controls

Respiratory Protection:IN OUTDOOR OR OPEN AREAS,USE BUREAU OF MINES
APPROVED MECHANICAL FIL
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
VOL
Protective Gloves:REQUIRED FOR PR
Eye Protection:USE SAFETY EYEWARE DESIGN
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT TO
CONTAMINATED CLOTHING.
Supplemental Safety and Health
INHALATION:ANESTHETIC,IRRITATION OF THE RESPIRATORY TRACT OR ACUTE
NERVOUS SYSTEM DEPRESSION CHARACTERIZED BY
HEADACHE,DIZZINESS,STAGGERING GAIT,CONFUSION,UNCONSCIOUSNESS OR
COMA.SKIN OR EYE

Chemical Properties

Boiling Pt:B.P. Text:311 TO 373F
Percent Volatiles by Volume:64

Stability

Stability Indicator/Materials to Avoid:YES

Disposal

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE,AND
FEDERAL REGULATIONS.INCINERATE IN APPROVED FACILITY.DO NOT
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.